help with no1 exhaust stud

scarlet · Post by **scarlet** » Sat Jun 06, 2009 12:14 pm

can any one help me are the exhaust studs parallel or have they got a shoulder on them as i am trieing to get my no1 stud out as the stud had sheared level with the manifold used stud easyouts then it sheared of level with the head,

David Edwards · Post by **David Edwards** » Sat Jun 06, 2009 12:19 pm

Sory cant help, my local garage did mine for £30.00 but I am sure someone will have the info soon, good luck anyway.

haydn callow · Post by **haydn callow** » Sat Jun 06, 2009 12:57 pm

You will have to drill it out with a carbide drill..use a 6mm first and a bit of tube in the manifold to centre it. Hard work now the easyout is snapped in there.

help with no1 exhaust stud

help with no1 exhaust stud

Re: help with no1 exhaust stud

Re: help with no1 exhaust stud