stud patten

peanutcrusher · Post by **peanutcrusher** » Tue May 26, 2009 9:52 pm

can anyone tell me the stud setup for the wheels on my bongo e.g spacing etc i know they are a five stud that much i worked out on my own

i'm looking at a set of wheels, they are from a VW passat will they fit.

scanner · Post by **scanner** » Tue May 26, 2009 10:15 pm

No

You need

PCD - 5x114.3

Offset - 35 to 45

Centre bore - 67.1

http://www.alloyguide.com/

peanutcrusher · Post by **peanutcrusher** » Tue May 26, 2009 10:21 pm

thanks

peanutcrusher · Post by **peanutcrusher** » Mon Jun 01, 2009 9:54 pm

do any alloys from any other cars fit the bongo?

scanner · Post by **scanner** » Mon Jun 01, 2009 11:12 pm

Yes look in the guide - follow the link posted earlier.*

Just look for cars with the same PCD and centre hole diameter.

*Hint - it's why I posted it.

peanutcrusher · Post by **peanutcrusher** » Wed Jun 03, 2009 9:58 pm

what does this mean on wheels

7.5J X 17H2. FL757

scanner · Post by **scanner** » Wed Jun 03, 2009 10:35 pm

First - those I'm pretty sure about.................

7.5 = Width of rim in inches
J = Profile of rim well
17 = diameter of rim in inches

Then those I'm not at all sure of.................

H2 = no idea
FL757 = Load index of rim in Kg's???

Unless anybody else knows for certain.

stud patten

stud patten

Re: stud patten

Re: stud patten

Re: stud patten

Re: stud patten

Re: stud patten

Re: stud patten