Following a recent MOT I took the Bongo to have the tracking checked as there was evidence of wear on the front tyres inner edges (standard 15 inch tyres/wheels). The local garage said they couldn't do it as their computer would not have the relevant data for a Bongo. I printed off the tracking Datasheet and went back but their response was that although it told you how to do the tracking it didn't give the alignment data. I got the same response from Kwikfit, another local tyre centre as well as ATS. ATS said they would check it out and align to what they took as the correct position.
I was wondering if anyone out there did have the necessary data for the next time I take it in.
Many thanks,
Stig444
To Bongo is to be human
Tracking Information
Moderators: Doone, westonwarrior
-
francophile1947
- Supreme Being
- Posts: 11354
- Joined: Mon Dec 18, 2006 6:15 pm
- Location: Norwich
Re: Tracking Information
Details on this thread http://www.igmaynard.co.uk/bongo/forum/ ... ng#p287475
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
-
dandywarhol
- Supreme Being
- Posts: 5446
- Joined: Mon Dec 19, 2005 10:18 pm
- Location: Edinburgh
Re: Tracking Information
They'll probably want the figures in degrees and minutes, not linear.
Minus 10 minutes to positive 1 degree is the range for standard circumference tyres.
Maybe this should be added to the database Ian
Minus 10 minutes to positive 1 degree is the range for standard circumference tyres.
Maybe this should be added to the database Ian
Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690