Plastic Moulding for Mirror

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
apapa
Bongonaut
Posts: 69
Joined: Sun Feb 01, 2009 12:13 pm
Location: London W3

Plastic Moulding for Mirror

Post by apapa » Wed Feb 25, 2009 5:49 pm

I managed to prang my bongo and broke the glass in the passenger side mirror. I ordered the new glass and tried to click it in. It appears that there is some sort of plastic moulding missing.

I have attached photos of the glass and the mirror. Is there a part missing? Any idea where I can get hold of one?

Many thanks

Image
Image
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: Plastic Moulding for Mirror

Post by mikeonb4c » Wed Feb 25, 2009 6:26 pm

That looks fine as it is apapa - the 4 clips in the corners around the holes in the mirror backplate should snap into place when mated up with their respective lugs/recesses. I firm press and they should all snap together rather loudly. removing the mirror glass always made me nervous as I felt if I levered fro mthe edge, I could break the glass. I sorted it as I had a v large sucker bought from a camping shop and intended as a socket for an awning storm pole. By slapping this on the mirror I was able to pull and pluck it away from its 4 snap connections.
jaylee
Supreme Being
Posts: 5500
Joined: Wed Mar 05, 2008 4:56 pm
Location: AQVAE SVLIS

Re: Plastic Moulding for Mirror

Post by jaylee » Wed Feb 25, 2009 6:44 pm

I agree with Mike..!
It should just snap into place.
I think you just need to be bold with the snapping! :wink:

Maybe try adjusting the angle of the mirror servo thing away from the door slightly, the protrusion of the folding motor casing could be giving the wrong impression that the mirror don't fit..? :-k
Cheaper by comparison to a race horse...
Image
apapa
Bongonaut
Posts: 69
Joined: Sun Feb 01, 2009 12:13 pm
Location: London W3

Re: Plastic Moulding for Mirror

Post by apapa » Wed Feb 25, 2009 6:59 pm

Thanks for that. I will have another try.
a
apapa
Bongonaut
Posts: 69
Joined: Sun Feb 01, 2009 12:13 pm
Location: London W3

Re: Plastic Moulding for Mirror

Post by apapa » Wed Feb 25, 2009 7:14 pm

I have done it. As suggested some firm pushing resulted in a couple of clicks. I will be more careful next time. I have discovered there are some pitfalls upgrading from a polo to a bongo in inner London.

Thanks for your help.

a
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: Plastic Moulding for Mirror

Post by mikeonb4c » Wed Feb 25, 2009 11:04 pm

apapa wrote:I have done it. As suggested some firm pushing resulted in a couple of clicks. I will be more careful next time. I have discovered there are some pitfalls upgrading from a polo to a bongo in inner London.

Thanks for your help.

a
Goodo. Make sure all 4 have clicked home and yes - keep an eye on those mirrors. These days I fold mine every night when I come home and park outside the house. The folding mechanism doesn't take well to being bashed about - my first set both gave up after bashing episodes but luckily Waycar8 let me have the ones of his old w/o Bongo, for which I shall always be grateful [-o<

I think in may ways that those who don't have electrically folding mirrors on their Bongos are the lucky ones!
jaylee
Supreme Being
Posts: 5500
Joined: Wed Mar 05, 2008 4:56 pm
Location: AQVAE SVLIS

Re: Plastic Moulding for Mirror

Post by jaylee » Wed Feb 25, 2009 11:50 pm

Oh i dunno Mike, auto folding mirrors & blinds in my part of the world is the hight of sophistication!! :P
Cheaper by comparison to a race horse...
Image
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: Plastic Moulding for Mirror

Post by mikeonb4c » Wed Feb 25, 2009 11:52 pm

jaylee wrote:Oh i dunno Mike, auto folding mirrors & blinds in my part of the world is the hight of sophistication!! :P
:lol: :lol: yea I luv 'em too really - jez as long as they don't break and start flappin' away while I drive down the street :oops:
jaylee
Supreme Being
Posts: 5500
Joined: Wed Mar 05, 2008 4:56 pm
Location: AQVAE SVLIS

Re: Plastic Moulding for Mirror

Post by jaylee » Thu Feb 26, 2009 12:00 am

I had a Vauxhall Combo van for 13 years & must have fitted at least ten mirrors to it!
I was in it crossing a bridge in Stratford on Avon once, a car came the other way & hit off the mirror so hard it jumped off the bracket through the open window & landed in my lap!! :lol:
Cheaper by comparison to a race horse...
Image
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: Plastic Moulding for Mirror

Post by mikeonb4c » Thu Feb 26, 2009 12:09 am

jaylee wrote:I had a Vauxhall Combo van for 13 years
What!!! Have we met before?
Image
:lol:
Trouble at t'Mill
Bongolier
Posts: 385
Joined: Tue Oct 21, 2008 12:09 pm
Location: Bideford, Devon.

Re: Plastic Moulding for Mirror

Post by Trouble at t'Mill » Thu Feb 26, 2009 10:36 am

If you need to fit a mirror glass in future, make sure it's nice and warm beforehand. This should make the plastic clips more pliable and hopefully easier to fit.
Locked

Return to “Techie Stuff”