Hi there,
Does anyone know if it's possible to get a quick release bolt for the roof holes on an ATF?
I'm thinking it would be useful to mount a Omniview TV aerial on, I already have a bracket made up for it and I'd like an easy way to secure it to the roof via the existing holes, however if I could use say a bolt with a head similar to say a roof bar bolt that would be cool as it could be quickly installed and removed without any tools.
Roof Bar TQuick release Bolts
Moderators: Doone, westonwarrior
-
Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Roof Bar TQuick release Bolts
What you need is a 'male scallop knob'! Its not some fish reproductive device 
, but a plastic knob with a threaded stud that will screw into the insert in the roof. I think you would need the M8 type. See below:
http://shop.comdir.co.uk/Products.aspx? ... Template=C
Components Direct are very good for this sort of thing & I don't think there is a minimum order value, but you may want to stock up on other fixings & fittings to make the most of the P&P.
, but a plastic knob with a threaded stud that will screw into the insert in the roof. I think you would need the M8 type. See below:http://shop.comdir.co.uk/Products.aspx? ... Template=C
Components Direct are very good for this sort of thing & I don't think there is a minimum order value, but you may want to stock up on other fixings & fittings to make the most of the P&P.