just heard a blow fron the middle section of the exhaust and found that i need a new centre ( flexy part ) i fitted a new back box last year from these people http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=012
the question is has anyone fitted one of these centre bits if so do i need to order any other parts ie bolts gaskets etc etc, any advice would be welcome,, cheers, lee
centre exhaust question
Moderators: Doone, westonwarrior
-
tridentlee
-
Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: centre exhaust question
Just fitted a new stainless steel exhaust, so had to remove the old rusty one. I don't think you need any bolts or gaskets, or at least the gaskets on mine were still serviceable when I stripped it down (the rest of it was shot to bits tho')
Re: centre exhaust question
When I got my centre and tail section from Iezura that was all I got no gaskets or bolts etc. but then I didn't specifically order them either.
It's best to ring them anyway, as it ensures you get the right bit, so ask about gaskets etc at the same time.
The place that fitted mine just used the old gaskets and some firegum.
You may or may not get the bolts out OK, but I'd have thought they should just be fairly standard items.
It's best to ring them anyway, as it ensures you get the right bit, so ask about gaskets etc at the same time.
The place that fitted mine just used the old gaskets and some firegum.
You may or may not get the bolts out OK, but I'd have thought they should just be fairly standard items.