

Moderators: Doone, westonwarrior
No, I don't have one yet, but thanks - that answers my question.francophile1947 wrote:Am I correct in assuming that you already have a Mk3?
The answer is no, because the alarm is in the ciggie socket bit.
Not so odd (at least I don't think so). I see on your website the Mk 3s are £68, and the Mk 1 £70. I was thinking about getting the Mk 3, because I couldn't decide whether to wire it in permanently or not. If the cig plug was only providing the power, then I could chop it off later and wire it in permanently, should I so decide. Not having seen one of the alarms I wasn't aware that the alarm was in the cig plug as well. I just like to know my options before I buy anything.haydn callow wrote:No !!! you would have 2 bits of a Mk 3 both of which would not be any good .
What a odd question.
missfixit70 wrote:The low coolant alarm is just that - it detects coolant loss. The TM2 is a temperature monitor & alarm, 2 different alarms doing 2 different jobs, each covering different eventualities. There is also the Mason alarm - http://www.townace.plus.com/ie/ietemga2.htm - to consider, that does a similar job to the TM2 by making the Bongo's own "dumbed down" temp guage more sensitive & providing an audible settable alarm.
I have the low coolant alarm & the Mason alarm fitted, & am also trialing a new alarm for Simon Jones that detects overpressure of the coolant system
missfixit70 wrote:Ejaculations from the header tank
missfixit70 wrote:Ejaculations from the header tank
Thats why i couldn't think of anything to say, i was still chuckling to myselfBob wrote:Lizard's doing Double Entendres just now. Leave it to him.