'leccy blinds
Moderators: Doone, westonwarrior
'leccy blinds
Does anyone know if its possible to retro fit factory electric blinds into a bongo??
The Bongo Bodyshop - For all your Bongo Bodywork needs.
07584 134811
Advice is free.
07584 134811
Advice is free.
-
francophile1947
- Supreme Being
- Posts: 11354
- Joined: Mon Dec 18, 2006 6:15 pm
- Location: Norwich
Re: 'leccy blinds
I would guess it must be possible, but whether or not it's worth the effort is another matter 
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
-
bigdaddycain
- Supreme Being
- Posts: 10637
- Joined: Fri May 13, 2005 11:58 am
- Location: Ince Lancs
Re: 'leccy blinds
It would be possible, Whether its a "plug and play" set-up is anyone's guess. DBO and myself started to hunt for the plugs/loom on his manual blind freda,as he had the opportunity to purchase some electric blinds second hand. The job came to a standstill as merely removing the interior side panels didn't reveal any redundant plugs...I'm 99% certain they'll be there SOMEWHERE...Probably taped up just out of sight knowing our luck... 
The assembly guys at mazda won't chop off the unwanted plugs/connectors, they will tape em up, or blank them if they are unused for the spec of that vehicle (check behind your dash for white connectors for fogs/spots,cold start twin battery set-up, theyll be there whether you have those options or not) Which suggest that a generic loom is fitted.
The assembly guys at mazda won't chop off the unwanted plugs/connectors, they will tape em up, or blank them if they are unused for the spec of that vehicle (check behind your dash for white connectors for fogs/spots,cold start twin battery set-up, theyll be there whether you have those options or not) Which suggest that a generic loom is fitted.
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014