Technical questions and answers about the Mazda Bongo
Moderators: Doone, westonwarrior
-
duncsuk
Post
by duncsuk » Sat Oct 04, 2008 1:37 pm
Hi,
Having got fed up with the reversing beep, I've followed the forum instructions and disconnected the unit in the drivers footwell (RHS) .. peace

To do this, I unplugged the complete connector.
However, I now realise that this unit must also control the 'lights-left-on' beep, as that (rather useful) beep has also disappeared. Is is possible to configure the plug so that the lights-on beep works, but the reversing beep does not? If so, how ?
TIA ...
Duncan
-
sparkymik
- Bongolier
- Posts: 466
- Joined: Mon Apr 14, 2008 10:25 pm
- Location: The New Forest
Post
by sparkymik » Sat Oct 04, 2008 1:46 pm
Good question I've often wondered about that myself, as I have left the lights on I do have new batt's fitted but on day you know it's gonna happen
Sparky
The Bongo has gone. Long live The Bongo
Hymer Camp Swing 544/Fiat Ducato 2.3jtd
-
brorabongo
- Supreme Being
- Posts: 3226
- Joined: Wed Jan 17, 2007 5:56 pm
- Location: Brora, Sutherland
Post
by brorabongo » Sat Oct 04, 2008 2:01 pm
The reversing beep is only on the automatics, which I don't have. I guessing then, that there must be a sensor/switch which is activated when you select reverse, so disconnecting it would hopefully do the job.

ボンゴの激怒 pictures
Run your fingers over my Bongo, and I'll run my Bongo over your fingers!!

-
westonwarrior
- Supreme Being
- Posts: 2918
- Joined: Thu Apr 05, 2007 6:27 pm
Post
by westonwarrior » Sat Oct 04, 2008 2:31 pm
Under the cover of the streeing column is a white connector unconnect that and the reversing light beep and keys in ignition with door open stops but the light on beep with door open works.
Except if you have the lights on the reversing beeps starts again
-
duncsuk
Post
by duncsuk » Sun Oct 05, 2008 1:21 pm
Thanks for the suggestions
Under the cover of the streeing column is a white connector unconnect that and the reversing light beep and keys in ignition with door open stops but the light on beep with door open works.
I've just checked and the white connector you mention is already unplugged by a previous owner ?? As I recall, he said that unplugging this solved the annoyance of 'keys-in-ignition' beep .. but didn't affect the reversing beep.
Think I'll have look for the sensor that brorabongo suggests next ...
Thanks ..
-
westonwarrior
- Supreme Being
- Posts: 2918
- Joined: Thu Apr 05, 2007 6:27 pm
Post
by westonwarrior » Sun Oct 05, 2008 5:23 pm
Strange as I just went and checked in case I made a mistake
mine works exactly as I described.
do your side lights come on with the ignition?
-
duncsuk
Post
by duncsuk » Sun Oct 05, 2008 6:35 pm
do your side lights come on with the ignition?
No - they come on without the key in.
Got me thinking ... just dis-connected the leisure battery, but that made no difference (ie. lights still on). Couldn't find the reversing switch ... but that probably operates the reversing lamp, so probably couldn't disconnect anyway. Is the 'beeper' itself the same for all warnings or one for each ?
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
-
Contact:
Post
by mikeonb4c » Sun Oct 05, 2008 8:47 pm
duncsuk wrote:Thanks for the suggestions
Under the cover of the streeing column is a white connector unconnect that and the reversing light beep and keys in ignition with door open stops but the light on beep with door open works.
I've just checked and the white connector you mention is already unplugged by a previous owner ?? As I recall, he said that unplugging this solved the annoyance of 'keys-in-ignition' beep .. but didn't affect the reversing beep.
Think I'll have look for the sensor that brorabongo suggests next ...
Thanks ..
Can you guys help me. I'd like to reach this little white connector and unplug the wotsit that makes the keys in ignition buzzer go off. But I can't see how to get at short of splitting the top and bottom halves of the cowling and they really don't seem to want to split (once screws undone of course assuming I've missed none) and I don't want to do damage. Anyone had this experience / able to advise?

-
westonwarrior
- Supreme Being
- Posts: 2918
- Joined: Thu Apr 05, 2007 6:27 pm
Post
by westonwarrior » Sun Oct 05, 2008 8:53 pm
I undid all the screws and it didn't want to come apart so I jiggled my hands in the gap and undid the connector.
-
duncsuk
Post
by duncsuk » Sun Oct 05, 2008 9:03 pm
My connector is released by using a small screwdriver to 'unlock' the tab which 'locks' the plug in place, by pressing down o the tab. This tab is on 'top' of the plug and needs to be gently pushed downwards and then the connector should pull out in the direction of the engine ... at least mine did.
-
daveblueozzie
- Supreme Being
- Posts: 5922
- Joined: Tue Feb 20, 2007 9:25 pm
- Location: North West.
Post
by daveblueozzie » Sun Oct 05, 2008 11:08 pm
when i first came onto the forum i too asked about the door key in beep , i was told just to cut the white wire from the green connecting block, so i did ,and it stopped the beep for the ignition key in, dunno if that works for all the bongoes ,but it did for mine,
Lost without my Bongo.
-
brorabongo
- Supreme Being
- Posts: 3226
- Joined: Wed Jan 17, 2007 5:56 pm
- Location: Brora, Sutherland
Post
by brorabongo » Sun Oct 05, 2008 11:14 pm
ボンゴの激怒 pictures
Run your fingers over my Bongo, and I'll run my Bongo over your fingers!!

-
bongo bri
Post
by bongo bri » Mon Oct 06, 2008 9:11 pm
[quote="duncsuk"]Hi,
Having got fed up with the reversing beep, I've followed the forum instructions and disconnected the unit in the drivers footwell (RHS) .. peace

To do this, I unplugged the complete connector.
Hi The reverse bleep wire in the footwell connector is red & white.
I have cut mine and insulated the one end and extended the (live) other end to a dashboard light through earth.
Hope this helps
Brian
-
duncsuk
Post
by duncsuk » Sat Oct 11, 2008 4:49 pm
The reverse bleep wire in the footwell connector is red & white.
I have cut mine and insulated the one end and extended the (live) other end to a dashboard light through earth.
Hope this helps
Hmmm ...
Yes - it helped. I decided to replace the plug and then cut the said red/white wire. One beep indeed stopped .. the 'lights-on' beep

. Decided then to take the voltmeter (should have done this first, I guess !) and check which wire went 'live' when in reverse ... on my car it's the red/YELLOW wire ... so now all sorted. Reconnected the red/white, cut the red/yellow and all is 'beeping' well

-
teenmal
- Supreme Being
- Posts: 3656
- Joined: Thu Mar 27, 2008 6:08 pm
- Location: north lanarkshire
Post
by teenmal » Sat Oct 11, 2008 6:10 pm
The first time you reverse into someone or something,by mistake(selected wrong gear)
OOps wish I had a beep to remind me.
Only a thought.
Mal..