Missing belt??!!

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
User avatar
timmyt
Bongolier
Posts: 182
Joined: Fri Jun 13, 2008 11:12 pm
Location: saundersfoot, pembrokeshire, west wales

Missing belt??!!

Post by timmyt » Mon Jul 21, 2008 8:47 pm

Hi,just looking around engine bay this evening and notice that there seems to be a belt missing!!!!wondered if anyone knows what it may be?ill describe the best i can but im afraid i havent figured out how to post pictures on here yet!??
there are two belts next to each other from the alternator etc and im assuming that there are two as one is prob a back-up/load sharer?guess all is fine there but there seems to then be another alternator type unit infront of that with a large wheel on it and below the other belts another wheel where im assuming the belt attaches?!any ideas what it is and what im missing out on??!!
sorry for c**p description,hope someone figures out what im talking about!!
thanks!!!
User avatar
robdrinky
Bongolier
Posts: 186
Joined: Thu Jan 17, 2008 6:32 am
Location: Sevenoaks,kent

Re: Missing belt??!!

Post by robdrinky » Mon Jul 21, 2008 9:03 pm

you dont say which engine you have,but on my diesel i would expect to find belts for alternator,water pump together and air con on the other possibly.
does your air con work(if fitted)
the voices made me do it!

P reg unconverted blue/grey 2.5td AFT
User avatar
timmyt
Bongolier
Posts: 182
Joined: Fri Jun 13, 2008 11:12 pm
Location: saundersfoot, pembrokeshire, west wales

Re: Missing belt??!!

Post by timmyt » Mon Jul 21, 2008 9:19 pm

sorry its the 2.5 diesel,come to think of it the air con didnt seem to be working the other day,think you may have cracked it!!!any idea why it may have been removed or is it likely to have snapped and not been replaced prior to me owning it??if i just fit a new belt should all be ok or is there more to it??
thanks,chris
User avatar
haydn callow
Supreme Being
Posts: 5777
Joined: Mon Jan 08, 2007 9:50 pm
Location: Somerset
Contact:

Re: Missing belt??!!

Post by haydn callow » Mon Jul 21, 2008 10:07 pm

Yes !! it's your air con compressor belt and it may have been removed co's of a fault...to save fuel...or just snapped. Fit a new one and see what happens.
http://www.coolantalarm.co.uk
Developer of the Mazda Bongo Coolant loss Alarm
Also BMW Clocks
User avatar
robdrinky
Bongolier
Posts: 186
Joined: Thu Jan 17, 2008 6:32 am
Location: Sevenoaks,kent

Re: Missing belt??!!

Post by robdrinky » Mon Jul 21, 2008 10:42 pm

if it was working previously then maybe it snapped and fell off!
the voices made me do it!

P reg unconverted blue/grey 2.5td AFT
kawasaki kid
Tribal Elder
Posts: 687
Joined: Mon Jul 02, 2007 12:10 am
Location: Liverpool

Re: Missing belt??!!

Post by kawasaki kid » Mon Jul 21, 2008 10:57 pm

If the aircon belt has snapped before you replace it check what condition the alternator belts are in as if they look past their best it will be worth replacing them as well as you have to remove the aircon belt to replace them - why do the job twice when you can do it once. :)
If I had all the money I ever spent on my Freda ............ I`d spend it on my Freda.
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: Missing belt??!!

Post by mikeonb4c » Mon Jul 21, 2008 11:26 pm

Also, could be aircon compressor is knackered. No point fitting new belt only to wreck it. Can healthy aircon compressors be easily turned over by hand, as a check?

There's a Bongo aircon compressor on ebay right now. :roll:
User avatar
helen&tony
Supreme Being
Posts: 9869
Joined: Thu Nov 18, 2004 12:49 pm
Location: Bulgaria

Re: Missing belt??!!

Post by helen&tony » Tue Jul 22, 2008 4:47 am

Hi
Yes, you can turn the aircon pulley by hand, but if you find that when you turn the aircon. on, and it makes a noise and strains the car's engine when it's running, then the internal valve arrangement is duff....check it out quickly as Mike says, and dive on that e-bay example
Cheers
Helen
In the beginning there was nothing , then God said "Let there be Light".....There was still nothing , but ,by crikey, you could see it better.
User avatar
timmyt
Bongolier
Posts: 182
Joined: Fri Jun 13, 2008 11:12 pm
Location: saundersfoot, pembrokeshire, west wales

Re: Missing belt??!!

Post by timmyt » Tue Jul 22, 2008 8:45 am

thanks everyone,the air-con compressor can be turned easily by hand and there doesnt seem to be any starange noises coming from it,also the alternator belts look fine..almost new in fact :? :?
does anyone know of a cross-match part for the air-con belt?is it the same as the b500 or ranger belt?
thanks again!
brookie
Bongonaut
Posts: 89
Joined: Wed Oct 03, 2007 12:57 pm
Location: eastbourne

Re: Missing belt??!!

Post by brookie » Tue Jul 22, 2008 2:15 pm

I've just picked up another spare an hour ago, try "Gates 6470mc" as a easily sourced belt from any motorfactors, the ref can be crossed too with other makes, no problem. It'll only be a few quid (mine was £4.90 + vat!). It is an easy job to replace too.

Mark.
Locked

Return to “Techie Stuff”