replaced coolant hose

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

francophile1947
Supreme Being
Posts: 11354
Joined: Mon Dec 18, 2006 6:15 pm
Location: Norwich

Re: replaced coolant hose

Post by francophile1947 » Tue Jun 10, 2008 4:29 pm

trekie wrote:i didnt find any problem with fitting the replacement hose, i made sure there were no sharp bends which would impede the water flow. i did consider triming the original hose but i did not trust it not to perforate again even in the short term. the rear heater was getting hot.
as a matter of interest, would water from a dehumidifier and an aircon be suitable to use if it was collected in a plastic container?

cheers

alex
Yes 8) :lol: :lol: :lol:
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
trekie

Re: replaced coolant hose

Post by trekie » Thu Jun 12, 2008 12:32 pm

i can get hold of de-ironised water from work, we have an aircon unit and a de-humidifier both churning out water which up to now, i have been dumping but i am now letting it build up and then i will bring it home. i will also try changing the thermostat( my dad, whenever he got a new car used to remove them and chuck them in the bin)
my only problems are that i will have to tackle the flushing my self as jan has just done her nail varnish :lol: :lol: and also, i dont have access to a hosepipe. its going to be carrying buckets of water around the block #-o
i have been using galileo for short runs and the gauge moves up occasionally but i am not pushing her. the coolant is now holding at a constant level. [-o<

cheers

alex
Locked

Return to “Techie Stuff”