fastest bongo in the north west ?

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

ccrobins

Post by ccrobins » Tue Mar 18, 2008 11:20 pm

i like the idea that the rears are larger - makesme think i have an F1 bongo !
John the sparky

Post by John the sparky » Tue Mar 18, 2008 11:29 pm

the reason for having directions on tyres, is to do with the grooves for dispersing water.....

so you could probably swap them round (on a dry day) to see if the wobble stops....

but would mean you'd have to change them all then change them back, so I guess only really to be done if loads of wear left on the tyres


John
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Post by mikeonb4c » Tue Mar 18, 2008 11:29 pm

bigdaddycain wrote:
mikeonb4c wrote:Finally checked mine against SatNav and it seems to overread by 5mph.
That's spot on mike,manufacturers actually factor in a 5%-10% of "over -reading" by the speedometer.

Just like the ecu's aren't set up to be 100% efficient,for the odd owner that lapses with car servicing,it's the manufacturer's little safety "get-out" clause....
Thanks BigDaddy - v interesting to know. Until we all used the same reliable yardstick (and assuming the odometer may be out by a similar amount) it makes it hard to have a meaningful debate about MPG. All each owner can do is observe relative improvement in their own vehicle as they make modifications etc. :roll:
John the sparky

Post by John the sparky » Tue Mar 18, 2008 11:31 pm

I thought the wheels were bigger at the back to save fuel, because it is always going down hill :lol: :lol: :lol:





TAXI! :lol:


John
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Post by bigdaddycain » Tue Mar 18, 2008 11:49 pm

John the sparky wrote:the reason for having directions on tyres, is to do with the grooves for dispersing water.....
And the directional grip john.... :wink:
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
John the sparky

Post by John the sparky » Wed Mar 19, 2008 12:24 am

how does the directional grip work then?

when I had tyres fitted, the tyre guy said it was just about the grooves :shock: they are fitted right anyway,

they surely must grip in both directions? but maybe wear more in one direction?

this could ruin my plans :oops: .... got a spare alloy and thought I'd put a matching tyre to the others... at worst I could get it swapped round by any tyre place, but wouldn't get stuck waiting for a tyre..... if I can't drive it carefully with the direction wrong... that's out the window! D'oh

Don't want to put a expensive pirelli on it!!!!

John
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Post by bigdaddycain » Wed Mar 19, 2008 12:34 am

I beleive it has something to do with the tyre design john, i'm no expert, but the different shapes of the grip pattern dictate the amount of grip available at different cornering situations,a mechanic noticed that one of my directional tyres was the wrong way round a few years back,he said it would wear really quickly,and i'd get great grip on that corner in reverse! :shock: Dunno if there was owt to it....? :?

You are quite right with the water dispersal aspect john.... :wink:
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
John the sparky

Post by John the sparky » Wed Mar 19, 2008 1:22 am

maybe I'll just do it anyway.....

what's the worst that can happen :shock: :shock: :lol:


John
Locked

Return to “Techie Stuff”