Left hand indicator
Moderators: Doone, westonwarrior
Left hand indicator
Hi Bongo Furies, I wanter to convert my indicator stalk to the left. After spending most of a day trying to turn it up side down, I gave up. I then went basic and simply clamped a length of bent 10mm copper pipe to the indicator stalk. The pipe goes over the top of the steering column, ending just above the wiper switch, and it works a treat. The dip switch also works, but in reverse.
-
- Supreme Being
- Posts: 3945
- Joined: Sat Jan 13, 2007 10:12 pm
- Location: Scottish Borders
Patience, you will get used to it after a while. I have a Jeep Cherokee with the turn indicator on the left side whilst the Bongo's turn indicator is on the right side. After not using one vehicle or another for a few days I quite often get them mixed up. But once settled in on a journey I rarely make this mistake again.
sorry to hear you spent all that playing with your indicator
MG is right youll get used to it i spent weeks flashing my wipers at other bongo owners
Second nature now.
Is that the same Radstock of the cleverly brothers



Is that the same Radstock of the cleverly brothers

All disclaimers count as i know nothing
BUY A V6er i like my affair with the petrol pump
BUY A V6er i like my affair with the petrol pump
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Many thanks
Thanks, for all the encouraging replies. This is the second time I am writing a reply, not sure where the first one went. Unfortunately I've only got one arm so I really do need a left indicator, luckily my piece of pipe clamped on does work OK. I fitted it last August and it is working a treat. Oilyjeans
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
It's somewhere in Techie Stuff:
http://www.igmaynard.co.uk/bongo/forum/ ... highlight=
Good to know you've found a solution.
http://www.igmaynard.co.uk/bongo/forum/ ... highlight=
Good to know you've found a solution.