km to mph-h.e.l.p......

tattoodaisy · Post by **tattoodaisy** » Sat Feb 09, 2008 1:11 pm

Helppppp please...!

I'm stuck....sat in bongo with everything apart and the dials just won't turn unless I do it mile by mile from the end. I may have to go and get a new clock from scrap but I'll have to remove the chip...uh....may need to move this to technical....

tattoodaisy · Post by **tattoodaisy** » Sat Feb 09, 2008 1:13 pm

and how can I remove the face without busting the needle?

Post by **westonwarrior** » Sat Feb 09, 2008 2:19 pm

Ok if you are trying to change the odometer to read miles rather than kms because you have installed a chip

get a small screwdriver and insert it between the dials and prise them apart slightly and hold them apart with the driver, the dial should then turn freelyjust move along the row untilyou have set all dials.

I think the needle pulls off and reattaches afterwards

do you have a refaced speedo at the moment?

tattoodaisy · Post by **tattoodaisy** » Sat Feb 09, 2008 2:25 pm

no I have a jap 180 with a mph sticker. just gonna try those dials again

Post by **westonwarrior** » Sat Feb 09, 2008 2:36 pm

ok why do you need to change the odometer reedings?

I'm guessing answers as to what I think you are trying to do

If we know exactly what you are trying to acheive and why, answers should be easier to get

Edited because I have read the other thread and understand now

tattoodaisy · Post by **tattoodaisy** » Sat Feb 09, 2008 3:21 pm

Thank you-it worked !

gotta wah m wax the beast now !

tattoodaisy · Post by **tattoodaisy** » Sat Feb 09, 2008 7:05 pm

...but now my rev needle's stuck, have to take it all apart again tomorrow