side light bulbs

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
Bongo Boozer

side light bulbs

Post by Bongo Boozer » Wed Jan 16, 2008 10:21 pm

Good Evening,
Could someone tell me how to change these bulbs. I have downloaded the fact sheet (PDF) and it is a jumble of symbols (it could be because i am using a MAC). I have also searched the forum to no avail.
I had a quick look on Sunday in the rain but I was getting to wet (so I went back to building my ARK).

Many Thanks
Cheers
Steve
User avatar
daveblueozzie
Supreme Being
Posts: 5922
Joined: Tue Feb 20, 2007 9:25 pm
Location: North West.

Post by daveblueozzie » Wed Jan 16, 2008 10:28 pm

if you mean the front side light bulbs, there is a screw on the top that lets you take the lens away from the body ,then you can get to the bulbs.
if you mean the rear bulbs there are two screws holding the unit which you then slide sideways to remove (carefully), then change the bulbs.
Lost without my Bongo.
User avatar
B*Witched Blingo
Supreme Being
Posts: 1950
Joined: Sat Oct 13, 2007 7:53 pm
Location: Lancs/Yorks (Up Narth t left abit)
Contact:

Post by B*Witched Blingo » Wed Jan 16, 2008 10:29 pm

Mr A changed mine on Saturday.. 2mins of a job.. Not that that helps u.. U will no doubt have an answer before he comes in...

Good luck
You Tube Films Click Here
"Get your wellies out. No likey floaty Bongo's"
Bongo Boozer

Post by Bongo Boozer » Wed Jan 16, 2008 10:30 pm

ah the screw i managed to see
sweet
thanks
steve
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Post by bigdaddycain » Thu Jan 17, 2008 12:53 am

Give the light unit a wiggle to help free it from the front wing steve...some are easier to remove than others.... :wink:
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
Locked

Return to “Techie Stuff”