heater control linkage

John the sparky · Post by **John the sparky** » Sun Dec 30, 2007 5:29 pm

Hello,

I've fixed my demister today.... searched the forum, reattached the linkage.... and thought that's it

just dropped wife off, and it's stopped working again, it seems the bit of plastic that retains it has snapped off...

probably my size 11 jimmy choo's.....

I've tapped the rod amd got an m3 nut on, but was wondering if this was common, and do you think I ought to source another plastic control ring?

cheers
John

haydn callow · Post by **haydn callow** » Sun Dec 30, 2007 6:53 pm

what you have done sounds good to me.

neil/di · Post by **neil/di** » Wed Jan 02, 2008 1:54 pm

Had the same problem as you John, superglued a piece of plastic to retain the link(not as good as your mod) has held for about a year now

John the sparky · Post by **John the sparky** » Wed Jan 02, 2008 5:04 pm

thanks for that....

you have both set my mind at rest.....

I'll now forget all about that, and find something new to worry about

cheers

John

BongoJim · Post by **BongoJim** » Thu Jan 03, 2008 6:44 pm

my linkage cable is missing completly

I have to bend down to change position.

No body has one do they ?

BongoJim

waycar8 · Post by **waycar8** » Thu Jan 03, 2008 6:57 pm

BongoJim wrote:my linkage cable is missing completly

I have to bend down to change position.

No body has one do they ?

BongoJim

linkage CABLE???, do you mean the white plastic bit where all the metal rods come out?, if so yes i have it still