sunroof on e bay

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
bongo rbk

sunroof on e bay

Post by bongo rbk » Wed Dec 12, 2007 11:55 pm

Theres a sun roof on E bay for a tin top, it says the motor and runners are there but the seller said no controls.

I've not seen any tin tops with a sun roof and was thinking of buying it and getting it fitted, but would like to know if anyone has done this?

Also where does the switch fit? and could one be found?
Harry
Supreme Being
Posts: 2034
Joined: Thu Aug 04, 2005 10:36 pm
Location: Grange over Sands, Cumbria
Contact:

Post by Harry » Thu Dec 13, 2007 12:49 am

My BONGOLOW has a ruddy great electric sunroof - factory fitted with an internal sliding blind to keep the sun off the passengers when not required.

The switch is in the middle of the ceiling just forward of the sunroof between the rear aircon vents.

Can't say that retro fitting one would be easy of even feasable.

good luck

H
http://watcherswildlife.co.uk

Towing a shed with a Citroen C4 Picasso 1.6hdi vtr+
scanner
Supreme Being
Posts: 7247
Joined: Wed Sep 19, 2007 10:20 pm
Location: Cambs

Post by scanner » Thu Dec 13, 2007 12:56 am

Harry wrote:My BONGOLOW has a ruddy great electric sunroof - factory fitted with an internal sliding blind to keep the sun off the passengers when not required.

The switch is in the middle of the ceiling just forward of the sunroof between the rear aircon vents.

Can't say that retro fitting one would be easy of even feasable.

good luck

H
Ditto - I wouldn't even consider it.

Does your Bongolow have a big flat gap in the flutes on the roof? If not you couldn't fit it anyway.
User avatar
dandywarhol
Supreme Being
Posts: 5446
Joined: Mon Dec 19, 2005 10:18 pm
Location: Edinburgh

Post by dandywarhol » Thu Dec 13, 2007 3:59 pm

Is the sunroof over the front passenger/driver's head or behind?
Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
scanner
Supreme Being
Posts: 7247
Joined: Wed Sep 19, 2007 10:20 pm
Location: Cambs

Post by scanner » Thu Dec 13, 2007 4:20 pm

Behind - it starts aft (sorry) of the roof mounted air vents.

It's effectively directly in line with and about the same size as the sliding door.
cheffy34
Supreme Being
Posts: 1369
Joined: Thu Aug 30, 2007 4:17 pm
Location: Planet earth "mostly"

Re: sunroof on e bay

Post by cheffy34 » Thu Dec 13, 2007 5:33 pm

bongo rbk wrote:Theres a sun roof on E bay for a tin top, it says the motor and runners are there but the seller said no controls.

I've not seen any tin tops with a sun roof and was thinking of buying it and getting it fitted, but would like to know if anyone has done this?

Also where does the switch fit? and could one be found?
Good luck rbk, i reckon it'll be difficult because of the ridges on the roof it will need flattening out , body shops dont like working in the roof line, leads to all kinds of problems. i had a new rear 1/4 panel fitted at someone ellses expense, the body shop wouldnt go near the roof line so chopped it in, worked out fine tho
cheffy34
Supreme Being
Posts: 1369
Joined: Thu Aug 30, 2007 4:17 pm
Location: Planet earth "mostly"

Post by cheffy34 » Thu Dec 13, 2007 5:44 pm

They got complete roofs with sunroof hole cut out on the partfinder in members area rbk, have a butchers
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Post by bigdaddycain » Thu Dec 13, 2007 7:55 pm

It'd probably be less mither to sell your bongo,and buy one with leccy sunroof already fitted...You may be buggering up the re-sale value too,with it not being a factory fitted jobby.

Can you imagine all the wiring to mess about with too? I'd opt for the electric relaxation of puttting up your feet instead... (we dont get much sun anyway :lol: )
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
bongo rbk

Post by bongo rbk » Thu Dec 13, 2007 11:41 pm

thanks everyone for all the replys i think i'm going to give the sunroof a miss. :roll: :roll:
Locked

Return to “Techie Stuff”