Blank Switches
Moderators: Doone, westonwarrior
Blank Switches
Whilst checking why my rear window heater wasn't working, I checked the rear of the switch on the dash and found the cable disconnected from the switch. Problem solved. But also noticed several of the blank switches had cables connected.
Came across this thread on same subject:
http://www.igmaynard.co.uk/bongo/forum/ ... k+switches
but no answers. Anyone know what the blanks are for?
Came across this thread on same subject:
http://www.igmaynard.co.uk/bongo/forum/ ... k+switches
but no answers. Anyone know what the blanks are for?
-
- Supreme Being
- Posts: 10637
- Joined: Fri May 13, 2005 11:58 am
- Location: Ince Lancs
Hmm, yes, there is at least one connector behind a blank on my bongo also.. I can see marks on the actual copper on the connection,so it was plugged into something at some stage.
My bongo had bullbars fitted originally, i suspect the connector used to fit onto the bullbar lights.
My bongo had bullbars fitted originally, i suspect the connector used to fit onto the bullbar lights.
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
- maxheadroom
- Supreme Being
- Posts: 1950
- Joined: Wed Feb 28, 2007 6:37 pm
- Location: Gloucester