ABS Warning light

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
lochan2

ABS Warning light

Post by lochan2 » Tue Aug 07, 2007 4:54 pm

Hi, Just completed a 2,500mile trip down to Rugby, Newcastle,Somerset,Dorset and Devon and unhappily my ABS warning light is on constantly. Does anyone know how easy it is to check the ABS wheel sensors and whether they are fitted to all 4 wheels on my 4WD.
I've check fluid level and thats ok, and am a bit loathe to seek garage help yet. Your friendly advice most welcome!
regards Lochan2
Nibs
Bongolier
Posts: 111
Joined: Tue Mar 22, 2005 11:12 am
Location: South Shields

ABS light

Post by Nibs » Thu Aug 09, 2007 9:02 pm

:D :o 8) :lol: Hi, my ABS light would come on then flash and the ABS would kick in. posted the problem on the site and was told to check the wiring behind the instrument pods as poorly insulated. Unclipped the terminals cleaned them up and put back all O.k now.
cheers Paul
rob and karen

Post by rob and karen » Fri Aug 10, 2007 12:30 am

I also had the abs warning light come on and also the heater/aircon dash would go dim (without the van lights on )and it was found that the rear side light bulb on driverside had a bad connection replaced the bulb and all has been well for close on 18 months now
rob
Locked

Return to “Techie Stuff”