Changin ATF

Crazy Legs Crane · Post by **Crazy Legs Crane** » Wed Jul 18, 2007 8:08 pm

Can someone tell me where the atf drain pan is? Preferabley a diagram or photo. I also need to know the type of sealant to use for the gasket. I have read the fact sheet on changing atf.

Thanks

Post by **westonwarrior** » Wed Jul 18, 2007 8:17 pm

there is no drain plug

It is either pumped out or the sump pan is dropped

francophile1947 · Post by **francophile1947** » Wed Jul 18, 2007 8:20 pm

Never done it, but everything I've read says you don't need a new gasket or sealant.

Crazy Legs Crane · Post by **Crazy Legs Crane** » Wed Jul 18, 2007 8:21 pm

Sorry, I meant the sump pan. The description does not match what I see. Do you have to remove the plastic underneath to see it?

ChrisEm · Post by **ChrisEm** » Wed Jul 18, 2007 9:11 pm

see here! This is what it looks like

http://www.igmaynard.co.uk/bongo/forum/ ... ht=#102665

You do not need to take the undertray off as the gearbox sump is to the rear of this.!

. You should not find it necessary to have to replace the gasket.

mikeonb4c · Post by **mikeonb4c** » Wed Jul 18, 2007 10:47 pm

Oh b*gger - just asked these questions on another thread, and the answers i need are on this one

Changin ATF

Changin ATF

Didn't word very well