arrrrgggghhhh, im still stuck...3 days later

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
caznsue

arrrrgggghhhh, im still stuck...3 days later

Post by caznsue » Wed Jul 11, 2007 8:25 am

please help me.........

im still need to know what bush/engine mount i need as bongo bits are struggling,

all my engineer said was that its the big bush that sits on top of my gear box (auto)

i can hear the engine rattling when im sat at lights and when i turn the engine off..

bongo bits are still waiting to hear back from japan....

he described it as a flat round ring quite big about the size of the diameter of a coffee cup,

can anyone help

caz
x
brianwfl

transmission mounting bush

Post by brianwfl » Wed Jul 11, 2007 11:06 am

Hi Caz,

re transmission bush, i have found the following part no. for a "transmission mounting bush" 39-340 same part no for both 2wd and 4wd but part is vehicle specific ie you must state when ordering 2wd or 4wd. could this be the part you are looking for. can you supply me with any more details
brgds brianwfl
brianwfl

Post by brianwfl » Wed Jul 11, 2007 12:20 pm

Hi Mick, unable to open the page reference you gave, it states it is no longer available

cheers
brianwfl
mick

Post by mick » Wed Jul 11, 2007 12:28 pm

Sorry Brian

try this, and if it works, scroll down to engine mountings

http://www.lushprojects.com/bongoparts/pages/
brianwfl

engine mounts

Post by brianwfl » Wed Jul 11, 2007 4:29 pm

Hi Mike,

ive got the pages on my office computer, but am out of the office at present. i am using a blackberry mobile at present, and it goes wobbly when i try to download the parts pages due to file size.

brgds brian
mick

Post by mick » Wed Jul 11, 2007 5:34 pm

My IT skills are lacking, but you never know, you may be helped by this picture (if it appears !)

Image
brianwfl

transmission mount

Post by brianwfl » Wed Jul 11, 2007 5:55 pm

Hi Mike,

Spoken to me mate in kyngs lynn, he says the mounts are available from mazda dealers, if the vehicle is VOR (vehicle off the road) a special order can be made apparently, but no idea of timings. No prices were given

hope this helps

cheers brianwfl
caznsue

bush

Post by caznsue » Wed Jul 11, 2007 7:11 pm

not sure whom im most stressed with.....bongo bits are always soooo busy, not returing phone calls or the chap i need is on the phone so can i call back in 40 mins!!

well i did manage to leave a message to say the part number and thats about as far as i have got...

this is since monday......calm down dear....blimey i only want a bush!!

no comments to that please....although that did make my face crack into a slight smile.....oh god theres another pun!! crack!!

think i will end this message right now...he he :oops: :oops: :oops:
Dirty & Flirty

Post by Dirty & Flirty » Wed Jul 11, 2007 7:23 pm

I have got some bush you can have, it will really chill you out, just dont tell the fuzz!
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Post by mikeonb4c » Wed Jul 11, 2007 10:42 pm

It al sounds vaguely rude to me :oops:
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Post by bigdaddycain » Thu Jul 12, 2007 2:25 am

And i'm far too innocent to know what they are going on about mike...
Crack? bush?... hit a president? O:)
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
caznsue

bush

Post by caznsue » Thu Jul 12, 2007 8:13 am

thanks very much for the pm

rang the guy and he was fab....bless him, but he did not have one either as someone had smatched the gearbox and the bush,

fingers crossed bongo bits rings me today....ive given them the part number that someone put on here so all being well im getting warmer,

my bongo is not off the road just dam noisy and engineer on standby to fix it..

perhaps there is a parts man somewhere.....if so i will get on for my engineer

will keep you posted

caz
caznsue

BUSH

Post by caznsue » Thu Jul 12, 2007 3:20 pm

WHOOOPPPEEEE, found the part, bongo bits say it was not the one on that plan.....anyway, was feeling chuffed and then they told me the price!! £85 plus vat and carriage............how much.............. :shock: :shock: :shock:


think i better keep hunting................


will keep you posted

thanks for all your help everyone
Locked

Return to “Techie Stuff”