Thank You Will be there at 10.00

Hi, anyone popping up to the Vintage Bus Rally at the Park&Ride Brislington Bristol?
If anyone is, a slim chance you may know what time it starts? Have looked on web sites around but couldn't find anything.

Thanking you in anticipation !!

I've currently got deep dish alloys, all R18. Have 255/40 on front and 265/35 on rear. Just had it lowered more so going up to 265/45 on rear.
Just make sure you check the load & speed rating. Good Luck.

And have previously got lowering springs already fitted !!!!! lol

Fair point, gradually making them aware of my mods, have full body kit inc. rear arches, 18" wheels, s/steel exhaust, slightly bit lower and probably more to come. Every few months i tell them something and it only goes up a bit, one day it will all catch up with me. But until then.......... :wink ...

So fed up trying to get it lowered. Have just taken springs off and got the grinder out, 1 1/2 rings later and looks so much better. Maybe not advisable for everybody, but it suits me. On advice, i've uprated the shocks and gone for a slightly wider tyre (from 265/35 z r18 up to 265/45 z r18) to ...

Hi Elze, on Ebay as we speak. £79.99 plus £38.50 post from Japan. Marc

I had the same problem for ages, but using the smallest drill bit i could find i drilled at both bottom corners. At the time i could just kneel down and blow the water through (best to do in seclusion lol) Have never had a problem since, and left unsealed. Marc

Many Thanks Do like them bulbs! So much more to do, but lights will definitely be getting done as soon as i can. Also trying to work out how to put in a high level brake light as well on the spoiler..... Would love to supply pictures but still trying to work out how to put them on here. File always ...

Am trying to remove to enable me to drill a hole in back, put in a white LED (on the white reflector) lol and then wire it to the reversing lights. Same with the red reflector wired to the brake lights. Think i should be able to run the wires up through the rear door into van and down through the ...

Many thanks for replies. Looks a friend has suggested using a heat source on the back to loosen the double sided tape!!! May be worth a try, as to the tailgate I have a 96' so no grab handles but will take your advice on board. Thanks again Marc

Hi, My chrome mirror covers need touching up, anyone out there know to remove them without damaging them please?

Also how do you remove the reflector strip from rear door?

Any help will be appreciated. Thank You Marc

I've already had mine lowered, but still not enough!! Have contacted Bell Hill and they state "the bongo's had it's day, and you cannot get lowering kit anymore" (wrongly i believe, but if anyone
knows where i can get coilovers, please let me know.