Search found 12 matches

by dazonit
Mon Nov 04, 2013 7:31 pm
Forum: Techie Stuff
Topic: running rough
Replies: 9
Views: 3267

Re: running rough

coolant level is fine i think the smoke is unburnt fuel as even on full throtle it will not rev all i can think is its down to the fuel pump or the seals in the pump
by dazonit
Sun Nov 03, 2013 9:50 pm
Forum: Techie Stuff
Topic: running rough
Replies: 9
Views: 3267

Re: running rough

the air intake is fine there is white smoke from the exhaust there looks to be fuel around the very top of the pump will take a pic tomorow and post
thank for your advise
by dazonit
Sun Nov 03, 2013 5:03 pm
Forum: Techie Stuff
Topic: running rough
Replies: 9
Views: 3267

Re: running rough

Help please
Well go it to fire up but Ideling very rough and will not rev at all any ideas
Cleaned the banjo filter and still the same
Cheers
by dazonit
Sun Nov 03, 2013 11:26 am
Forum: Techie Stuff
Topic: running rough
Replies: 9
Views: 3267

Re: running rough

sorry no i did not run ok with the fuel pipe in the glass ill have another look tomorow and let you know how i get on [-o<
by dazonit
Sat Nov 02, 2013 4:53 pm
Forum: Techie Stuff
Topic: running rough
Replies: 9
Views: 3267

Re: runing rough

well it wont fire up at all now the only other thing i can think of is to check the little mesh filter were the fuel feeds the pump
by dazonit
Sat Nov 02, 2013 3:48 pm
Forum: Techie Stuff
Topic: running rough
Replies: 9
Views: 3267

running rough

my bongo started to run rough on my way home srugling to rev above 3000 and a slight missfire if i hold the pedel down at 2000 its the same loss of power and slight missfire iv blown down the fuel pipes to the tank and dont see any blockage iv tried to feed the pump from a clean jar of diesel and ...
by dazonit
Wed Aug 14, 2013 10:32 pm
Forum: Techie Stuff
Topic: bouncey brake pedal / feels like abs
Replies: 10
Views: 2857

Re: bouncey brake pedal / feels like abs

put it in for the mot to see what was wrong and it pessed with 1 advisory for the hand brake adjustment :shock: it went through the mot yesterday so i insured it and taxed it took it out for its first good run today as it was stood for 2 years and the pedal started bouncing agian :( gave it a good ...
by dazonit
Fri Aug 09, 2013 9:16 pm
Forum: Techie Stuff
Topic: bouncey brake pedal / feels like abs
Replies: 10
Views: 2857

Re: bouncey brake pedal / feels like abs

tried all of the above apart from the diesel i was useing a strong bar and broke /split four sockets and two ring spaners
will try diesel and see how vit gose
thanks for the replys
atb daz
by dazonit
Wed Aug 07, 2013 10:23 pm
Forum: Techie Stuff
Topic: bouncey brake pedal / feels like abs
Replies: 10
Views: 2857

Re: bouncey brake pedel / feels like abs

Sounds like a warped disc.on renewing the rears was the hub face totally clean prior to new disc fitted cause any rubbish etc can make the new disc not sit flat.but does seem like distortion t


I concur, had the same problem and it was a buckled disc? changed the two front and everything sweet ...
by dazonit
Tue Aug 06, 2013 9:51 pm
Forum: Techie Stuff
Topic: bouncey brake pedal / feels like abs
Replies: 10
Views: 2857

Re: bouncey brake pedel / feels like abs

Sounds like a warped disc.on renewing the rears was the hub face totally clean prior to new disc fitted cause any rubbish etc can make the new disc not sit flat.but does seem like distortion t

ill take of and check tomorow after work the old discs were rusted beyond use as the bongo was stood in ...
by dazonit
Tue Aug 06, 2013 9:38 pm
Forum: Techie Stuff
Topic: bouncey brake pedal / feels like abs
Replies: 10
Views: 2857

bouncey brake pedal / feels like abs

when i touch the brake pedel or brake i can feel the pedel going up and down under my foot it feel just like abs. i have fitted new rear brake discs but not front`
im thinking it could be warped front discs any ideas or have you had the same thing
cheers
by dazonit
Tue Aug 06, 2013 9:17 pm
Forum: Techie Stuff
Topic: Tank fuel pickup and fuel strainer
Replies: 7
Views: 2857

Re: Tank fuel pickup and fuel strainer

Does anyone know what size/type screws I will need to the replace the 8 screws on the fuel tank access plate?

had the same problem with these screws what i did was cut a slot in them with a junior hacksaw got a sharp flat head screwdrive and shocked each screw ie hit the scewdriver with a hamer ...

Go to advanced search