Just changed the cam belt and fuel filter on my bongo and at the point of lifting the centre metal cover off the engine I notice a small rubber hose hanging off. It has snapped off from a small black square part that sits just above the glow plug rail along with 3 others a rubber pipe loops up and ...

All sorted and working fine thanks again. It was just a bad earth.

Thank you both for your suggestions, i think Simon has hit the nail on the head as while i had the front off i stripped everything off cleaned it up and under sealed the panels, how dumb am i to think it would be a good idea, never mind i will sort it out tomorrow. Thanks again.
Paul

Ok, for the first time in a long time I need your help, I have had a small shunt and damaged the front of my bongo, I have stripped off all the damaged parts and repaired or replaced them ( I will just add that most of the damage was caused by my bull bars smashing through the bumper, front panel ...

Thanks Jaws
Thats a great help as i don`t want to slam my bonnet down and hit the top of the battery.

Paul

Thanks Dave, but its not the amps thats the problem its the Height, width and depth of the battery to fit the tray bought from the club.
Paul

Can anyone tell me the dimensions of a leisure battery to fit in the LB tray.

Thanks
Paul

Thanks Mike i will give him a ring.

Paul

Hi mike, jo and emma

Thanks for your help, the caravan has a zig but most of the places we go to have no hook-up as we do medieval re-enacting which is normally on a farmers field hens the need to charge two battery’s from the Bongo. Can you recommend a relay to do the job.

Hi all
After years of driving and camping in my Bongo we have decided to get a caravan for a bit more comfort in our later years, we will be towing the caravan with the bongo and need some advice. Now the tech bit, I have bought a L/B tray, Tow bar twin elec kit from the club and I want to fit it ...

Hi All

My Hold light is flashing etc etc, I get six flashes a gap and six flashes which suggests output speed sensor or shift solenoid A, can someone tell me where they are located and how to change them.

Thanks Paul