Not sure someone's free work should be put in a chargable document area (fact sheets)the.sasquatch wrote:Amazing, thanks muchly certainly going to be a time saver when making my own. This needs to be a fact sheet so it's easy to findphilpdr wrote:Found a link to the plans I've got.Could be the same Vince.
http://homepage.ntlworld.com/vincent.lo ... oards.html
I' build my own cupboards and I found it easiest to sketch up the sides, then the front, then the bottom, then finally the back, which bolts through to the grab rail bolt holes. Then I cut the sides out of cardboard, following the vehicle contours. After than it's just a case of cutting the long flat pieces.
The tricky part is the flush doors. You'll need a router and some practice!