HOLD 66 - RESULT
For starters i was misreading the code. 6 long-pause is 60 and 1 long-pause 6 short is 16. 16 is the speed sensor that kicks in when the 60 (shift solenoid A) is a fault.
It required changing the solenoid bank in the tranny.
It's a simple enough task IF ye have the facilities, tools and technical help. Simon from Dunnings (01305783113) supplied the parts and a very helpful bolt chart and info on the job. I have the facilities and the wife did spanner-boy so there was no chance of getting it wrong
This is not for dabblers; Dunnings do the drive in - drive out service.
Many thanks to all you guys who took an interest and contributed int that certainly led to the solution.
Thanks to Ian, without whom this medium would not exist and for the stat.
HOLD 66
Moderators: Doone, westonwarrior
- dandywarhol
- Supreme Being
- Posts: 5446
- Joined: Mon Dec 19, 2005 10:18 pm
- Location: Edinburgh