Bongo Fury

hi all,
i need to replace the drivers door lock (somebody used the wrong size screwdriver to break in) i got the door lock from tom at bell hill (good man!) so now i need to know how to remove the door panel and i know that i can rely on all you sages out there to come to my rescue. thanks in anticipation.

regards

alex and jan

If Pippin was here, he would say something really sarcastic like "Seek and ye shall find".

But I'm not going to say that. Oh no. Instead I will give you the direct link to the information you require:

http://www.igmaynard.co.uk/bongo/forum/ ... el+removal

Ofcourse, if I was a grumpy old b*gger, which I'm not, I could have said

USE THE BLOODY SEARCH FACILITY!!!

But as everyone thinks it's useless, I'm not going to say that either.

thanks ian,
actually i did try the search so i will say no more. also, i dont have full access to the site because i dont have a home pc( i moved) and your server wont talk to my works server( or it would if you sold viagra or penis enlargements!)so i havnt had the password in months, are you still doing doing airports? let me know when you get to speke! ( thats john lennon airport in liverpool)

regards and i dont think you are at all grumpy

alex and jan

You don't need to unclip the rod off the interior door handle; if you've undone the screws in the handle, it can be fed through its hole as you lift the panel away by gently twisting it a bit.

When refitting the panel, lower the window first as it makes it easier. As for the plastic door liner, be wary of the black mastic that fixes it on, its a total git to get off. I was wearing latex gloves and the twang as I pulled my hand away truly stung!