My repair man took out the ABS fuse. I have put a new one in, but the ABS light is still on.
Do I have to do something to clear the error and if so, how?
ABS light on
Moderators: Doone, westonwarrior
-
- Junior Bongonaut
- Posts: 15
- Joined: Tue Apr 10, 2018 12:24 pm
-
- Junior Bongonaut
- Posts: 15
- Joined: Tue Apr 10, 2018 12:24 pm
Re: ABS light on
I have used the diagnostic port and got the following error codes -
53 Motor or motor relay
11 Right front wheel sensor
53 Motor or motor relay
11 Right front wheel sensor
- g8dhe
- Supreme Being
- Posts: 10223
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: ABS light on
Usually the wheel sensors are either a connector that has leaked water in, try unplugging the intermediate connector, cleaning and WD40 into both sides before reconnecting, otherwise it maybe a damaged sensor coil itself.
The other as it implies will be within the controller module.
The other as it implies will be within the controller module.
-
- Junior Bongonaut
- Posts: 15
- Joined: Tue Apr 10, 2018 12:24 pm
Re: ABS light on
That'd be the one under the starter battery. I will do that tomorrow and also clean the fuse connector.g8dhe wrote: ↑Thu Feb 22, 2024 7:58 pm Usually the wheel sensors are either a connector that has leaked water in, try unplugging the intermediate connector, cleaning and WD40 into both sides before reconnecting, otherwise it maybe a damaged sensor coil itself.
The other as it implies will be within the controller module.
Re: ABS light on
Got to be wheel sensor