Page 1 of 1

HT leads for V6 question

Posted: Tue Apr 09, 2019 1:39 pm
by lucklesspedestrian
Hi

This is going to sound dumb but brain's a bit fried today and wanted to check before I bought:

As posted before I have a lumpy idle on the 2000 V6. Local garage reckons I need new HT leads, fair enough.

I am correct in thinking that I'll need 2 of these parts aren't I??

https://bongoland.co.uk/product/ht-lead ... iver-side/

expensive if so even with the 12.5 % discount!

Cheers

Re: HT leads for V6 question

Posted: Tue Apr 09, 2019 1:48 pm
by g8dhe
No there are two separate sets you looked at the Offside 3 then there is the Nearside 3 https://bongoland.co.uk/product/ht-lead ... nger-side/

Re: HT leads for V6 question

Posted: Tue Apr 09, 2019 1:51 pm
by Ian
You will need the nearside and the offside set. You really should change the king lead as well. They are expensive because they are genuine Mazda ones. There's nothing wrong with the after-market leads, but some people have said that if running on LPG then use the genuine ones only.

You can get a full set of after-market leads, including king lead (7 in total) at https://bongoland.co.uk/product/after-m ... et-for-v6/

(Geoff, you beat me to it......)

Re: HT leads for V6 question

Posted: Tue Apr 09, 2019 2:25 pm
by lucklesspedestrian
Geoff, Ian, thank you from the heart of ny bottom!