Page 1 of 1
fuel return loop
Posted: Thu Nov 02, 2017 5:49 pm
by playnotwork
Ahhhhhhhhhh!
Done the head for a third time and on the finishing straight i managed to snap the diesel return loop off one of the end injectors. Is there anyway to reattach it.
Quite soft metal, will it solde, braise or can i tap it and seal with JD weld or am i going to have to buy another.
If so anyone know wjere i can get one £85 on ebay
cheers
Re: fuel return loop
Posted: Thu Nov 02, 2017 10:15 pm
by mikeonb4c
THREE cracked heads? How on earth did you manage that
Re: fuel return loop
Posted: Fri Nov 03, 2017 2:51 am
by Northern Bongolow
dont think hes said that mike.
Re: fuel return loop
Posted: Fri Nov 03, 2017 9:45 am
by teenmal
According to Nothern Bongolow ,you need to be carefully what leak off pipe assy you order .
Quote...
"careful,
there are 2 types, one for long glow plugs, one for short glow plugs. the difference is the low plugs and connecting bar sit lower and will touch the top of a high loop pipe."
Re: fuel return loop
Posted: Fri Nov 03, 2017 3:19 pm
by mikeonb4c
I'm sure he hasn't but just trying to understand the 'done' in
Done the head for a third time
Yrs, Confused and Ageing
Re: fuel return loop
Posted: Tue Nov 14, 2017 12:46 am
by playnotwork
had to buy one £35 quid so not to bad, fuel pump leaking now
Re: fuel return loop
Posted: Wed Dec 06, 2017 1:53 pm
by cutlass
"£85 on ebay"????
for next -
https://www.ebay.co.uk/p/Genuine-Ford-O ... 1609798705 Alu-ring I used kia/hyundai Porter, Galloper, Pregio
Re: fuel return loop
Posted: Wed Dec 06, 2017 3:13 pm
by cutlass
