Page 1 of 1

Removing Steering wheel cover (V6)

Posted: Mon Jul 24, 2017 11:36 pm
by wildrobot
Hello,

So i've got an intermittent issues with my horn see....

http://igmaynard.co.uk/bongo/forum/view ... 90#p693874

I'm just wondering how to remove the squishy steering wheel cover to get access to any wiring / horn elements to give it a clean

I'm worried about about affecting the airbag, any advice on how to remove this squishy cover OR should i leave it alone?

Cheerios x x

Re: Removing Steering wheel cover (V6)

Posted: Tue Jul 25, 2017 2:43 am
by Northern Bongolow
remove the battery terminals then sit with your foot on the footbrake for 6 hours till the lights exhaust the ecu battery, then its safe to remove the airbag. [-o< [-o< [-o< .

note in the drawing below there are 2 screws one either side.

http://lushprojects.com/bongopartsmk2/c ... mgno=.html

Re: Removing Steering wheel cover (V6)

Posted: Tue Jul 25, 2017 11:01 am
by wildrobot
Seriously six hours!!!?

Re: Removing Steering wheel cover (V6)

Posted: Wed Jul 26, 2017 4:18 am
by Northern Bongolow
no. :shock: :lol: remove the battery terminals, footbrake till the lights go out then wait 5-10 mins, you should be ok then [-o< [-o< [-o< [-o< .