Page 1 of 1

REMOVAL OF ORIGINAL KITCHEN POD

Posted: Thu Jul 06, 2017 11:08 am
by GARYSCRIVEN
Hi, can anyone help on removing the original kicthen pod/cube that comes with some bongos i have unscrewed it all and its ready to pop out but i am stuck on what to do with the electrical side of things in there that go to it from the front batteries many thanks

Re: REMOVAL OF ORIGINAL KITCHEN POD

Posted: Thu Jul 06, 2017 1:38 pm
by Northern Bongolow
look up simon jones, hes local to you and has had bongos for years, he should bob round and help.

http://igmaynard.co.uk/bongo/forum/memb ... file&u=936

Re: REMOVAL OF ORIGINAL KITCHEN POD

Posted: Thu Jul 06, 2017 2:57 pm
by g8dhe
Just unplug the cables should be all that is necessary. You might need to tie back the ventilation fan cable as well as it runs up the window.

Re: REMOVAL OF ORIGINAL KITCHEN POD

Posted: Sat Jul 08, 2017 9:26 am
by GARYSCRIVEN
Many thanks all done,just got to try and work out how to get the interior lights to work now and reconnect them some how any help on that to would be appreciated thanks again

Re: REMOVAL OF ORIGINAL KITCHEN POD

Posted: Sat Jul 08, 2017 10:04 am
by g8dhe
The interior lights ? Which ones aren't working ? Not sure they should be affected by the Galley wiring at all.

Re: REMOVAL OF ORIGINAL KITCHEN POD

Posted: Sat Jul 08, 2017 1:11 pm
by GARYSCRIVEN
It's the rear little one and the tube light in the middle of van, they were working when connected to the kitchen cube leisure battery but I've taken this all out now ready for my side conversion many thanks for you help