Bongo Fury

Posted: **Wed Nov 23, 2016 3:48 pm**

I am going to change hoses,Water Pump Ect But my van has not got a Bleed hose so any ideas on how I can bleed the system

Posted: **Wed Nov 23, 2016 4:01 pm**

Put a 'T' piece in the turbo pipe and add a bleed pipe.......you must have a Ford Ranger engine fitted

Posted: **Wed Nov 23, 2016 4:16 pm**

Which engine?

The 2 ltr petrol doesn't need bleeding.

Posted: **Wed Nov 23, 2016 5:14 pm**

haydn callow wrote:Put a 'T' piece in the turbo pipe and add a bleed pipe.......you must have a Ford Ranger engine fitted

Thank for that will give it ago

Posted: **Wed Nov 23, 2016 9:27 pm**

Posted: **Thu Nov 24, 2016 12:32 am**

Bob wrote:Which engine?

The 2 ltr petrol doesn't need bleeding.

Correct,and due to this,it doesnt have a bleed hose. So if yours is the 2ltr petrol,it will self bleed

Brian

Posted: **Thu Nov 24, 2016 12:46 am**

sorry but this has no reason
other than to get me 4 posts on the trot

Posted: **Thu Nov 24, 2016 1:13 am**

Well, if you've got the trots you could hang a sheet round the four posts for privacy.

Posted: **Thu Nov 24, 2016 9:57 pm**

Ah ah ah !!!

System Bleed