Page 1 of 1
Burner Hobs / sink
Posted: Wed May 11, 2016 12:18 pm
by Bongalow Bill
Anyone know of a burner / hob -sink that would fit 455mm x 455mm?
My only option so far is a smev PI8621RP
Thanks in advance
Re: Burner Hobs / sink
Posted: Thu May 12, 2016 6:57 am
by winchman
Isn't much choice available apart from Smev.
Smev do a far bigger range its just finding some one who stocks them all as most seem to just push certain models.
I have a spare Smev 4 burner with grill in the garage looked on line and can only see one boating type place selling them but its ideal for a camper its so compact
I used domestic two burner in mine and an old sink from a coach
Re: Burner Hobs / sink
Posted: Thu May 12, 2016 7:04 am
by winchman
Just looked at the one you quoted thats very small and expensive, I feel a twin burner one would be better
If you look at the Camping DF200 this is one of the most compact stoves I know of, it could easily be secured to the work top, in my experience two burners are much better, I cook outside using a Coleman petrol stove.
Re: Burner Hobs / sink
Posted: Thu May 12, 2016 11:54 am
by Bongalow Bill
I do like the idea of a twin burner, this looks the only option for my space
http://www.jacksonsleisure.com/caravan- ... ravan-hob/
Any idea on the type of gas bottles required?
Re: Burner Hobs / sink
Posted: Thu May 12, 2016 12:35 pm
by winchman
Any bottle will be fine as long as you buy the correct regulator.
If using it in Winter use Propane.
Space will be the issue
Camping 907 is the smallest but they are expensive at £23 + £50 deposit
Calor etc do a 4.5 or 7 Butane, or a 6kg Propane
Re: Burner Hobs / sink
Posted: Thu May 12, 2016 3:51 pm
by Bongalow Bill
Excellent thank you
Re: Burner Hobs / sink
Posted: Sat May 14, 2016 7:12 pm
by Bongalow Bill
So iv just picked up a retro Ender's 2 burner stove, any ideas how I connect to a gas bottle? All that's on the back is a threaded copper tube does the regulator screw onto this?
Re: Burner Hobs / sink
Posted: Sat May 14, 2016 7:20 pm
by winchman
If its a permeant install it should be hard piped usually in copper which should be clipped in position from the stove to a hose tail and then a flexi hose between the hose tail and regulator.
If its portable a hose tail on the stove then flexi hose to the reg.
To be honest unless you are 100% certain what you are doing pay some one to do it for you.
Re: Burner Hobs / sink
Posted: Sat May 14, 2016 7:26 pm
by Bongalow Bill
It's a portable camping stove, with little legs, I'll have a look into it many thanks
Re: Burner Hobs / sink
Posted: Sat May 14, 2016 7:30 pm
by winchman
You can buy the bits from Ebay etc but may be easier to try locally to het the right size hose tail, heres one of the many different sizes and types, a Caravan / camping shop will have all the bits
http://www.onlinebearings.co.uk/Hosetai ... -barb.html
Re: Burner Hobs / sink
Posted: Sat May 14, 2016 7:48 pm
by Bongalow Bill
Great! Thanks it does indeed look like I need a hose tail! Thanks for the name of that part my local garage sells all the other bits, is it likely they will stock a hose tail?
Thanks again
Re: Burner Hobs / sink
Posted: Sat May 14, 2016 10:20 pm
by Simon Jones
Any camping / caravanning / outdoor leisure shop will stock suitable regulator and hose.