Page 1 of 1
remote receiver position
Posted: Sun Nov 08, 2015 9:08 pm
by hijimhere
Has any body got photo of the OS door innards showing the receiver position for the CDL - I have had a look inside my door and all I have is the actuator operated by the key in the door lock. Thanks for any help.
Re: remote receiver position
Posted: Sun Nov 08, 2015 9:20 pm
by Simon Jones
If you have one, it will will look like the one here:
http://www.igmaynard.co.uk/bongo/forum/ ... al#p568397
Re: remote receiver position
Posted: Sun Nov 08, 2015 10:09 pm
by hijimhere
Thanks for the photo - I don't have the OE receiver in the door - I have an after market kit - so looking where to position the receiver.
Re: remote receiver position
Posted: Sun Nov 08, 2015 11:38 pm
by sotal
Don't think I took a photo in situ but it is just mounted to the door card itself just underneath the window switches. Nothing fancy - no fancy mount or anything - you could mount it in the same place.
The wire aerial just ran along the inside of the door card taped in place.