Bongo Fury

Planning to remove and repaint as its pretty rusty.

It looks like it should be easy enough if the bolts undo. Is there anything I should be aware of? Is the ARB under tension?

Cheers

no. just undo it mate. soak yer nuts first though, if they break off then you have to drill them out and fit new bolts, not a 2 min job. if your fitting new rubbers then just warm em up with a blow lamp then wire brush them clean first, then spray.

Good idea to replace all the rubbers, brackets and drag links at the same time.

Did mine a couple of months ago as one of the brackets had failed.

The rubbers and links are pretty new so I'll clean them up.

Thanks for the tips !