Page 1 of 1
wireing sink pump and tap in bongo
Posted: Sun Aug 16, 2015 5:59 pm
by steveandmary
how to wire sink tap and water pump . tap colours black and brown . pump blue and brown . the tap is smev . pump whale . thanks for any help
Re: wireing sink pump and tap in bongo
Posted: Sun Aug 16, 2015 6:11 pm
by g8dhe
Simple series connected +12volts (fused 5 amp typically) > to switch > to motor > to earth. Wire colours have no relevance in this situation, but I would put the 12 volts to the Brown on the switch, the black to the Brown of the motor and the blue to earth.
Re: wireing sink pump and tap in bongo
Posted: Sun Aug 16, 2015 9:59 pm
by steveandmary
thanks geoff got it now , will fit tomorrow thanks .