Bongo Fury

Is it possible to change the water pump on a V6 without removing the cam belt? I'm guessing not, because it probably drives the water pump?

I would not now for sure ,, but with the down ward belt pressure ..... maybe ..??



http://lushprojects.com/bongopartsmk2/c ... 2of02.html

You don't have to remove the cam/timing belt to replace the water pump, the water pump is located in the centre of the gear trail and has its own drive pulley and belt.

Good Luck.

Thank you. I'll pass this on to my friendly garage guy. He was going to try and find out, but he's so busy!

Cheers,


Mark