Bongo Fury

Ok, me again, Barri has taken a liking to holding on to the key at the end of a journey. I put brake on and put gearbox in to Park, it normally means another sort trip down the road to reset something before the key will come out!!!!!
It not all the time just when its going to be bloody annoying and cause friction between Mrs silage and me
any ideas O wise one's

Sounds like the gear selector interlock is playing up, just try putting it in and out of park a few times to see if that helps.

Check and adjust the cable 46-300 in the diagram below;
http://lushprojects.com/bongopartsmk2/c ... mgno=.html

Check and adjust the cable 46-300 in the diagram below;

Thanks, any info on adjusting cable? plus location etc.

Well the location is the front of the gear selector, take off the central console etc.
Also see here http://www.igmaynard.co.uk/bongo/forum/ ... 34#p587734

Hi silage, did you get your new ignition key?.

yes new key for wife to use, she don't drive,only me mad , but go her one to be able to have access if im not around.

silage wrote:yes new key for wife to use, she don't drive,only me mad , but go her one to be able to have access if im not around.

Tip...

Use the new one yourself for at least a while to wear it in a bit.

scanner wrote:

silage wrote:yes new key for wife to use, she don't drive,only me mad , but go her one to be able to have access if im not around.

Tip...

Use the new one yourself for at least a while to wear it in a bit.

Sound advice.....

yes will try that, all so put switch cleaner in to key switch and seems ok at mo, but good to have another option with cable if problem returns.

Graphite dust from a pencil is a good trick to lubricate a sticky key. Be careful about using switch cleaner as it will wash out the lubrication already in the lock.

Good point