Bongo Fury

The 1999 Mazda Bongo/ Ford Freda 2.0 petrol paper air filter is 200mmx 236mm x 29mm according to the last one I bought

Now K&N do this reusable one http://www.knfilters.com/search/product ... od=33-2117

Part 33-2117 30 mm x 232 mm x 197 mm

Has anyone used one of these as an alternative to the disposable filter?

Close but no cigar?

Many thanks

Dr B

Used one on my old landrover
Brilliant

Much more responsive to the accelerator

specifically, does this particular one work as a replacement for the disposable paper one on the 2.0 petrol 1999?

Here you go

Last column is the Part number from - http://www.gruppem.co.jp


SGL3 Diesel Turbo 95.05-05.12 2500 E-9280

SGLW Diesel Turbo 95.05-05.12 2500 E-9280

SGL5 4WD. Diesel 95.05-05.12) 2500 E-9280

SGLR 4WD. Diesel 95.05-05.12 2500 E-9280

SGEW 95.05-05.12 FE 2000 33-2117

SG5W 95.05-05.12 J5 2500 33-2117

SGE3 97.11-05.12 FE 2000 33-2117

Domo arigato!
http://www.amazon.co.jp/REPLACEMENT-FIL ... B00APEEOZ8

That about seals it!

I've fitted one to my first diesel Bongo and then got one for my V6. Doesn't seem to perform any better than a conventional paper filter but does have the advantage of lasting forever. Probably over 3 or 4 years it will have paid for itself.

mikexgough wrote:Here you go

Last column is the Part number from - http://www.gruppem.co.jp


SGL3 Diesel Turbo 95.05-05.12 2500 E-9280

SGLW Diesel Turbo 95.05-05.12 2500 E-9280

SGL5 4WD. Diesel 95.05-05.12) 2500 E-9280

SGLR 4WD. Diesel 95.05-05.12 2500 E-9280

SGEW 95.05-05.12 FE 2000 33-2117

SG5W 95.05-05.12 J5 2500 33-2117

SGE3 97.11-05.12 FE 2000 33-2117

Perfect

Copy and paste the filter part number into eBay and they pop up Cheaper that K&N direct too. Personally, I've always used Piper X, but K&N have been good to me in the past too

Easy to fit, just removed the air pipe from the filter housing to get better access,
and fitted like-for-like against the old paper one.

Acceleration seems smoother and maybe faster at the cost of a bit of induction roar.

Next thing is spark plugs and maybe (resistor cap?) HT leads

Dr B

Distributor cap (Dizzy cap) ..??

True! Will look to see if it has one!

Easily sourced .. check how many ignition leads are on yours .. on the 2.0 there are usually only 4 .. (but there can be 6 or 7 on the V6) ..

http://www.ebay.co.uk/itm/BLUEPRINT-ADM ... 0732636592

http://www.yoyopart.com/oem/4505923/bos ... nterchange one or two the same???

I'll move over to a new thread on dizzy cap equivalences!

I would think that is the ... wrong ... dizzy cap for the 2.0 Bongo as that is for a five 'King Lead' ignition .. which yours does not have ..

Will look at the HT lead connectors later, maybe this is the one....?????



Cross Interchange for:BLUE PRINT ADM514212

Data Source: http://www.autopartoo.com/oem/blue-print/adm514212.html

More here: http://www.autopartoo.com/oem/partscros ... =ADM514212

If Blueprint parts are available then (to me) that is by far the better ones to go for ..

Most Blueprint parts are genuine OEM (ie:- not pattern parts)..

They are usually made in the same Factories as .. Mazda .. Toyota ..Honda etc; source there own products from .. and generally cheaper than a franchised dealers price ..