Page 1 of 1
Electric blinds master switch not working on drivers side
Posted: Sun Oct 05, 2014 9:36 pm
by New Forest Terrier
The master switch for my electric blinds has stopped working on the drivers side. That's the dashboard one that controls both blinds. Individually both blinds work from the switches next to the windows. Motors are fine. It looks like either the switch or the wiring. Is it an easy switch to remove and has anyone suggestions on troubleshooting? The passenger side switch works fine.
Re: Electric blinds master switch not working on drivers sid
Posted: Sun Oct 05, 2014 9:56 pm
by mikeonb4c
Buy some of that electric motor spray cleaner and giving it a dose. Mine were being iffy but gave them a dose of that some years back and it cured the problem. I now use my blinds every day when I park at work. It's use it or lose it with electrical stuff
Re: Electric blinds master switch not working on drivers sid
Posted: Sun Oct 05, 2014 11:00 pm
by Simon Jones
The switch just pops out if you push it from the rear. You could then swap them round and see if the fault moves or stays with the location.