Question for those using the AVA F45S mounts....
Are the self tapper really required? I can't see the structurally a self tapper will add anything to the strength of the installation, from what I can make out the mounts go into the gutter, the gutter lip will prevent the bracket from bending out.
AVA F45S Mounts
Moderator: Muzorewa
-
- Tribal Elder
- Posts: 601
- Joined: Wed May 14, 2014 6:25 am
-
- Tribal Elder
- Posts: 601
- Joined: Wed May 14, 2014 6:25 am
Re: AVA F45S Mounts
Anybody?
- mikeonb4c
- Supreme Being
- Posts: 22875
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
- Contact:
Re: AVA F45S Mounts
I believe people have used vw t4 brackets before, which are cheaper, but I can't be sure of that. Have a search and/or see who else replies.
Re: AVA F45S Mounts
They don't add anything to the strength of the installation, but they do stop a bit of rocking when going over pot holes.Mark Elvin wrote:Question for those using the AVA F45S mounts....
Are the self tapper really required? I can't see the structurally a self tapper will add anything to the strength of the installation, from what I can make out the mounts go into the gutter, the gutter lip will prevent the bracket from bending out.
668. The Neighbour of The Beast.
-
- Tribal Elder
- Posts: 601
- Joined: Wed May 14, 2014 6:25 am
Re: AVA F45S Mounts
Hmm, I suspect some Sikaflex will do the same.Ian wrote:They don't add anything to the strength of the installation, but they do stop a bit of rocking when going over pot holes.Mark Elvin wrote:Question for those using the AVA F45S mounts....
Are the self tapper really required? I can't see the structurally a self tapper will add anything to the strength of the installation, from what I can make out the mounts go into the gutter, the gutter lip will prevent the bracket from bending out.
May opt to leave them off.