Page 1 of 1
Vacuum pipes on engine disintegrated... Where suppose to go?
Posted: Wed Jun 04, 2014 8:29 pm
by langtoftnick
Looking at my engine I see a disconnected T piece in a vacuum hose, a disintegrated T piece lying in the engine bay and some broken bits of vacuum pipe..... I have no idea where it's all supposed to go and connect together and can find no diagrams on the net anywhere.
I have no way of posting photos here that I can see but I have some which I can email to anyone who might be able to help.
Re: Vacuum pipes on engine disintegrated... Where suppose to
Posted: Wed Jun 04, 2014 9:07 pm
by Bob
Is it running OK?
Could they be old pipes which have been replaced?
Re: Vacuum pipes on engine disintegrated... Where suppose to
Posted: Wed Jun 04, 2014 9:11 pm
by langtoftnick
Seems to run ok, but the open T piece is no blanked off, and there is another stub from the block which appears open too.
Any diagrams anywhere anyone?
Re: Vacuum pipes on engine disintegrated... Where suppose to
Posted: Wed Jun 04, 2014 9:16 pm
by francophile1947
Re: Vacuum pipes on engine disintegrated... Where suppose to
Posted: Wed Jun 04, 2014 9:39 pm
by Driver+Passengers
Re: Vacuum pipes on engine disintegrated... Where suppose to
Posted: Wed Jun 04, 2014 10:16 pm
by mikexgough
You will need some 3.2mm vacuum hose... motor factors for about £4 for 2 meters plus use Windscreen Washer adapters... if the green one way valve has gone (13-995) 0n the lush projects diagram use
http://www.altecautomotive.co.uk/screen ... 2059-p.asp one of these....
Re: Vacuum pipes on engine disintegrated... Where suppose to
Posted: Wed Jun 04, 2014 11:39 pm
by Simon Jones
Diesel or petrol engine?