Page 1 of 1

Figure 8 strip rubbing?

Posted: Mon May 05, 2014 8:34 am
by spud350
Went away this weekend and used my Easi Canopi which I've never tried before. It went up easily enough and as I only want it for a sun shade looked good for the job. However when sat in the van there is a constant creaking noise from the figure 8 strips. Does anyone else suffer this? I understand with the breeze they will be move, but A) it's quite annoying and B)I guess it's rubbing the paint.
Has anyone suffered this and any solutions available?

Cheers Spud.

Re: Figure 8 strip rubbing?

Posted: Mon May 05, 2014 5:55 pm
by mchacksu
I was worried about this myself so I painted mine to match the car and stuck them on with silicon. Worked a treat the other weekend no noise and s :D ecure....

Re: Figure 8 strip rubbing?

Posted: Mon May 05, 2014 11:29 pm
by Jim the Box
I used Teflon based oil rubbed it all over the guttering stops the creaks and helps the figure of 8 locate and be removed much easier.

Re: Figure 8 strip rubbing?

Posted: Tue May 06, 2014 7:07 pm
by spud350
Don't think I want to go down the stick on route. Will try some oil and see how that goes.

Cheers Spud.