Page 1 of 1
Clock and cubby from 626?
Posted: Mon Feb 24, 2014 12:35 am
by Banjoblue
So does anyone know, will the clock and cubby from a 626 fit with a single din radio? One like this?
http://www.ebay.co.uk/itm/MAZDA-626-GXI ... 485bc68229
Re: Clock and cubby from 626?
Posted: Mon Feb 24, 2014 12:56 am
by Simon Jones
Yes it fits and can be made to work, but figuring out the wiring is the tricky bit and you'll need the plug and some of the wiring from the donor vehicle. I've got it written down somewhere or other.
Re: Clock and cubby from 626?
Posted: Mon Feb 24, 2014 1:58 pm
by Banjoblue
Cool. I'm about to sell on my bruised and battered 626 so may take this out before moving it on. Any tips on removal?
Re: Clock and cubby from 626?
Posted: Mon Feb 24, 2014 2:18 pm
by Poohbear
Yes, it works. We've got one in ours and the wiring wasn't difficult to work out. I think it just pulls out or it's easier if you can push it out from the back.
Re: Clock and cubby from 626?
Posted: Mon Feb 24, 2014 9:20 pm
by Northern Bongolow
Banjoblue wrote:Cool. I'm about to sell on my bruised and battered 626 so may take this out before moving it on. Any tips on removal?
if its not the more modern digital speedo check if its got a speedo that GA5R on it, they go straight in a bongo and read in miles.