Bongo Fury

Any one ever removed there,s .mines blocked as I snapped a needle off in it trying to reposition it!
( bit heavy handed unfortunately)
Don't want to force it as I can't seem to get it to move from out side and can't get at it from inside
(Unless u know better)
Any help much appreciated.

Never tried to remove a Bongo one, but generally there are two plastic 'wings' on the rear that need to be squeezed together to allow it to be released. I can't recall what access is like from the read I'm afraid.

http://lushprojects.com/bongopartsmk2/c ... mgno=.html

Hi kingbillybongo , owing to the fact that you have probably knackered the jet anyway, I would just prise it out and replace with a New push fit jet.

Good luck.