Bongo Fury

Just fit new rad and long o/s metal pipe which goes to rear heater , bled system etc, all hoses hot, temp stable, bubbles appear to have stopped but for some reason rear fan has stopped working, now is this a coincidence or have I done something wrong, and could it just be the fuse. Cheers

Likely to be a coincidence. Check the fuse and also double check you've got the 'rear' switch on up front.

Hi simon, hope so, and wot do you mean exactly, thanksjase

If you have manual controls, there will be a rocker switch marked 'fan' or 'rear' to the right of the steering wheel. If you've got digital controls, there will be a push switch marked 'rear' on the panel. Without this being switched on, the rear fan will not work.

Ahhh right, ill have to check, its an Nreg manual 2.5td tintop if that makes any difference, many thanks simon

It'll be one of these then: http://www.ebay.co.uk/itm/Mazda-Bongo-T ... 43c043c012

And switch on the front fan.

we have all done it sometime .