Page 1 of 1

rearfog lamp

Posted: Sat Aug 31, 2013 9:21 pm
by joca
Hi, I have my fog lamp fitted to the offside reversing lens. I purchased a red bulb on ebay which was 21 watts. The site said it was not e rated but would pas the MOT. It failed the MOT today. Do any of you were I could pick one tommorow. It is the cap less type. I have tried halfords but they dont do one in red. Thanks in advance. Joca

Re: rearfog lamp

Posted: Sat Aug 31, 2013 9:24 pm
by the laird
Get a clear one a paint it red for quickness then get proper one

Re: rearfog lamp

Posted: Sat Aug 31, 2013 9:36 pm
by joca
Hi Laird. Thanks for the quick reploy. The one on ebay was a dark red but it lit pink in colour. I have painted another bulb red but it still does not look right. I have orderd some flush fitting reversing lights off ebay. They will not arrive before the retest.Thats why I am for a quick fix. Joca

Re: rearfog lamp

Posted: Sat Aug 31, 2013 9:52 pm
by the laird
Give the bulb a few coats of paint ,even nail varnish(not yours though)

Re: rearfog lamp

Posted: Sat Aug 31, 2013 10:03 pm
by Bob
Worth popping a few red Quality Street wrappers inside the lens.

Re: rearfog lamp

Posted: Sat Aug 31, 2013 10:08 pm
by the laird
Bob he'd be cheaper buying a lamp ,you no seen the price a tin of q s are now :D :D

Re: rearfog lamp

Posted: Sat Aug 31, 2013 10:14 pm
by joca
Hi Bob, I work for Cadburys so I would not by a competiers product, LOL. Mind you if it gets me through the MOT. Joca

Re: rearfog lamp

Posted: Sun Sep 01, 2013 8:37 am
by rita
Is this the type of E rated bulb that you need.


http://www.ebay.co.uk/itm/Bulb-RED-T20- ... 3f281bd4d2

Re: rearfog lamp

Posted: Sun Sep 01, 2013 12:41 pm
by mikeWalsall
The origination poster said it had failed the MOT using similar bulbs ..

http://www.ebay.co.uk/itm/Bulb-RED-T20- ... 3f281bd4d2

"These bulbs are not E Marked but will pass an MOT." ...But when fitted to his .. it did not ...

Re: rearfog lamp

Posted: Sun Sep 01, 2013 2:37 pm
by Simon Jones
Personally, I would return the bulb to the supplier with a copy of the failure certificate, requesting a full refund. You could also report him to trading standards...

If you need to get thru the MOT quickly, get some red cellophane type material which you can cut to size and fit either inside or outside the lens.

Something like this would probably be ok:

http://www.halfords.com/webapp/wcs/stor ... yId_255230