Page 1 of 1
front bullbar fitting
Posted: Mon Apr 29, 2013 1:30 pm
by junior
hi friends, just purchased a front bull bar with spots, sump plate etc and im reassured that it will have all the bolts and fixings when it arrives. but i could do with some advice on wether its hard to fit or any tips on how to fit it please. bit of a semi novice diy er but prepared to have a go. thanks.
Re: front bullbar fitting
Posted: Mon Apr 29, 2013 2:59 pm
by mikeonb4c
Bar and guard very easy to fit, make sure you get the bottom brackets included. Spots will obviously need you to understand how to wire them up.
Re: front bullbar fitting
Posted: Tue Apr 30, 2013 2:38 pm
by junior
mikeonb4c wrote:Bar and guard very easy to fit, make sure you get the bottom brackets included. Spots will obviously need you to understand how to wire them up.
thanks for that. All seems pretty straight forward then
Re: front bullbar fitting
Posted: Tue Apr 30, 2013 3:32 pm
by mikeonb4c
junior wrote:mikeonb4c wrote:Bar and guard very easy to fit, make sure you get the bottom brackets included. Spots will obviously need you to understand how to wire them up.
thanks for that. All seems pretty straight forward then
Yes its easy to see what bolts go in where when you offer the parts up to the body (oooh matron) as long as yer nuts are obliging and not rusted on
