Bongo Fury

Hi my heater resistor has packed in. looking on web there are two air con and climate control. my control is the push button digital display type is that the climate control type? And are they difficult to fit? thanks

its not a resistor its a transistor

http://www.dalbani.co.uk/catalogue/prod ... hp?id=4939

cant be that hard as ive done it twice

They are commonly referred to as 'resistor packs' regardless of what is inside the box. The manual control version is fairly easy to fix with a soldering iron, but I've not attempted the digital control version. There are a few on ebay, but unless they specifically say suitable for digital controls, then safe to assume they're not. You can order them from all the usual Bongo suppliers and many Mazda dealers.

This is what they call a resistor pack..



http://www.mazdabongo.com/catalog/elect ... trol-95-03

That's the correct one that bigboy requires , you don't come across those as readily as the manual type.

yeah but thats 80 plus quid were as bit that blows is a tenner

Sounds like you've just found a gap in the market to offer a repair service

If only my eyes were better,but i find fidley things a pain now

wonkanoby wrote:If only my eyes were better,but i find fidley things a pain now

Its a very good tip,

Hi guys thanks for the tips my old fella now thinks he can fix it been looking today to remove it but cant see for looking aclue to its location please.

http://www.igmaynard.co.uk/bongo/forum/ ... +soldering

look at pictures in that both are in similar plastic box

Thanks bud